3D Drawings THE21 SUB WF PRO PS
THE21 SUB WF PRO PASSIVE SEALED specifications
The21 SUB WF PRO PASSIVE SEALED is an application-specific version of our highly regarded The21 SUB PRO PASSIVE SEALED. The WF designation in the model name stands for WaveForming. Use of Trinnov’s WaveForming technology determines not only the number of subwoofers on both the front and rear walls,…
General
Speaker Type
21” forward-firing, dual gap motor structure with 2 inner and 2 outer voice coils, neodymium motor
XMAX
17.5 mm excursion each direction (35 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion
Principle
Sealed
Passive | Active
Passive
Recommended Amplifiers
1Ch DSP and 1Ch amplifier are required. Min. recommended amplifier: 109 Vrms, 154 Vpk, 27.3 A; equivalent to 3000 W @ 4 Ω with correct RMS & peak limiter settings
Recommended ASCENDO Amplifiers
DSP4-6602, DSP4-10K2, or DSP-4D + AIA2-10K2 IS
Measured Data
SPL Peak (Peak / Half Space 2pi)
Measured Data 139 dB @ 63 Hz
Frequency Range
Measured Data (without DSP) 62 Hz - 500 Hz / -3 dB 28 Hz - 500 Hz / -12 dB
Power Handling
4000 W
Efficiency
99 dB / 1 W/m 2 pi
Impedance
4 Ω
Directivity Horizontal x Vertical in deg°
360°
Max Linear Air Volume Displacement
1.54 US. liq. gal. | 5.82 L
Input
Input Terminal
Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille)
610 | 635 | 518 (Height without feet: 610)
Dimensions (W/H/D) inch (Without Grille)
24 | 25 | 20 6/16 (Height without feet: 24)
Packing Dimensions (W/H/D) mm
710 | 710 | 640
Packing Dimensions (W/H/D) inch
29 2/16 | 27 15/16 | 25 3/16
Weight
94.80 lbs | 43 kg
Gross Weight
110.23 lbs | 50 kg
Design & Mounting
Enclosure
Internally braced MDF
Finish
Structural paint black
Mounting
Floorstanding with feet
Name
The THE21 SUB WF PRO PASSIVE SEALED is supplied with a front cover as standard







