Technical Data DSP4-6602
DSP4-6602 specifications
Pro Power Meets Residential RefinementThis is where pro power meets residential refinement. Engineered for real-world low-frequency duty, this DSP amplifier delivers what conventional residential amplifiers and typical pro amplifiers rarely combine: sustained output down to 5–10Hz, 6600W RMS…
AC Mains Power
Operating Voltage
100 – 240 VAC (± 10 %), 50/60 Hz
Inputs
Input Impedance
20 k Ω (Balanced), 10k Ω (Unbalanced)
Maximum Input Level
8.7 V rms (+21 dBu) (Default Gain)
Signal to Noise Ratio
≥ 105 dB (Default Gain, A-weighted, 20 Hz – 20 kHz, 8 Ω)
Frequency response
Typical: ±1.0dB (10 % Rated Power, 5 Hz – 20k Hz, 8 Ω)
Outputs
Rated Output Power (THD+N = 1%, 1 kHz continuous sine wave, one channel driving)
8 Ω/Stereo - 4 X 650 W; 4 Ω/Stereo - 4 X 1150 W; 2 Ω/Stereo* - 4 X 1650 W; 8 Ω/Bridge - 2 X 2200 W; 4 Ω/Bridge* - 2 X 3330 W
Output RMS Voltage
72.1 V
Output Peak Voltage
102 V
Gain (Rated Power, 1 kHz)
25 dB (4 V) – 43 dB (0.5 V)
Default Gain (Rated Power, 1 kHz)
31 dB (2 V)
THD+N
Typical: 0.05 % (10 % Rated Power, 8 Ω)
Damp Factor
≥ 1000 (8 Ω, 20 Hz – 200 Hz)
Cross-Talk
≥ 90 dB (20 H z – 1 kHz, Below Rated Power, 8 Ω)
Protection
Under Voltage, DC, Over Temperature; Limiter: Over Temperature, Over Load, Short
Dimensions & Weight
Dimensions (W/H/D) mm
483 | 45 | 376
Dimensions (W/H/D) inch
19 | 1 3/4 | 14 13/16
Packing Dimensions (W/H/D) mm
520 | 140 | 580
Packing Dimensions (W/H/D) inch
20 1/2 | 5 1/2 | 22 13/16
Weight
22.49 lbs | 10.2 kg
Gross Weight
26.23 lbs | 11.9 kg
