Technical Data THE12 P OW
THE12 PASSIVE ON WALL specifications
The12 PASSIVE ON WALL is positioned perfectly in the ASCENDO monitor lineup, a more dynamic and higher output alternative to the smaller The10 PASSIVE ON-WALL, and a stellar performance value compared to its more expensive, even higher-performance sibling, The12 PRO PASSIVE ON WALL.The combination…
General
Speaker Type
12” time-coherent point-source coaxial
Principle
Vented
Passive | Active
Passive
Woofer
12” woofer
Tweeter
2” voice coil diameter, compression driver
Recommended ASCENDO Amplifiers
AIA2-2704, AIA4-2404, AIA4-6004, AIA8-6004
Measured Data
SPL (Half Space 2pi)
Measured Data 121 dB (Cont.) / 133 dB (Peak)
Frequency Range
Measured Data (Without DSP) 95 Hz - 20 kHz / -3 dB
Power Handling
600 W
Efficiency
99 dB / 1 W/m 2 pi
Impedance
8 Ω
Directivity Horizontal x Vertical in deg°
85° x 85°
Input
Input Terminal
4-conductor Phoenix 12 AWG (3.3 mm²)
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille)
390 | 615 | 175 (With grille: 184.6)
Dimensions (W/H/D) inch (Without Grille)
15 3/8 | 24 3/16 | 6 7/8 (With grille: 7 1/4)
Packing Dimensions (W/H/D) mm
550 | 770 | 310
Packing Dimensions (W/H/D) inch
21 10/16 | 30 5/16 | 12 3/16
Weight
47.4 lbs | 22.0 kg
Gross Weight
56.22 lbs | 25.5 kg
Design & Mounting
Enclosure
Internally braced MDF
Finish
Matte black / White glossy
Mounting
4 x wall brackets for horizontal and vertical installation, VESA 200 x 100 mounting points
Name
The THE12 PASSIVE ON WALL is supplied with a front cover as standard
