WIRING BTL BLACK SWAN - DSP ULN 2-2604 D
THE BLACK SWAN PRO ACTIVE EXT specifications
Sculptural Design Meets Extraordinary Musicality
General
Speaker Type
4” compression driver with proprietary ellyptical horn and 1 x custom built 15” midwoofer
Principle
Vented
Passive | Active
Active, 2Ch DSP + 2Ch amplifier are required
Woofer
Custom built 15”
Tweeter
4” dome with an ultra-high-precision diaphragm-centering system and BEM-optimized 4-slot phase plug design (horn)
Recommended Amplifiers
1 x low-mid amp channels with 85 Vrms, 120 Vpk, 10.6 A; high 44 Vrms, 62 Vpk, 5.5 A; equivalent to 1 x LF 900 W @ 8 Ω, 1 x HF 240 W @ 8 Ω, with correct RMS & peak limiter settings
Recommended ASCENDO Amplifiers
DSP ULN2.2604 D
Measured Data
SPL (Half Space 2pi)
Calculated Data 125 dB (Cont.) / 132 dB (Peak)
Frequency Range
Calculated Data 55 Hz - 21 kHz
Impedance
8 Ω + 8 Ω
Directivity Horizontal x Vertical in deg°
80° x 45°
Input
Input Terminal
Output terminal horn - Neutrik Speakon Input terminal horn - Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille)
900 | 1385 | 580 (Height without feet: 1360)
Dimensions (W/H/D) inch (Without Grille)
35 3/7 | 54 1/2 | 22 5/6 (Height without feet: 53 1/2)
Packing Dimensions (W/H/D) mm
980 | 690 | 580 - Waveguide 1000 | 500 | 590 - Enclosure
Packing Dimensions (W/H/D) inch
38 4/7 | 27 1/6 | 22 5/6 - Waveguide 39 3/8 | 19 2/3 | 23 2/9 - Enclosure
Weight
36.38 lbs | 16.5 kg - Waveguide 114.64 lbs | 52 kg - Enclosure
Gross Weight
57.32 lbs | 26 kg - Waveguide 131.18 lbs | 59.5 kg - Enclosure
Design & Mounting
Enclosure
Internally braced birch ply and MDF
Finish
Woofer unit - Structural paint black Horn - Black matte
Mounting
Floorstanding with feet
Name
The THE BLACK SWAN PRO ACTIVE EXT is supplied with a front cover as standard
THE BLACK SWAN Be PRO ACTIVE EXT specifications
The THE BLACK SWAN BE PRO ACTIVE EXT is an impressive and extraordinary performing musical speaker system, that leaves nothing to be desired.Beryllium (Be)Although it is one of the most expensive materials used to make speaker diaphragms, in terms of stiffness-to-weight ratio, Beryllium is the…
General
Speaker Type
3” pure beryllium compression driver with proprietary ellyptical horn and 1 x custom built 15” midwoofer
Principle
Vented
Passive | Active
Active, 2Ch DSP + 2Ch amplifier are required
Woofer
Custom built 15”
Tweeter
3” pure Beryllium dome with an ultra-high-precision diaphragm-centering system and BEM-optimized 4-slot phase plug design (horn)
Recommended Amplifiers
1 x low-mid amp channels with 85 Vrms, 120 Vpk, 10.6 A; high 44 Vrms, 62 Vpk, 5.5 A; equivalent to 1 x LF 900 W @ 8 Ω, 1 x HF 240 W @ 8 Ω, with correct RMS & peak limiter settings
Recommended ASCENDO Amplifiers
DSP ULN2.2604 D
Measured Data
SPL (Half Space 2pi)
Measured Data 125 dB (Cont.) / 132 dB (Peak)
Frequency Range
Measured Data 55 Hz - 21 kHz
Impedance
8 Ω + 8 Ω
Directivity Horizontal x Vertical in deg°
80° x 45°
Input
Input Terminal
Output terminal horn - Neutrik Speakon Input terminal horn - Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille)
900 | 1385 | 580 (Height without feet: 1360)
Dimensions (W/H/D) inch (Without Grille)
35 3/7 | 54 1/2 | 22 5/6 (Height without feet: 53 1/2)
Packing Dimensions (W/H/D) mm
980 | 690 | 580 - Waveguide 1000 | 500 | 590 - Enclosure
Packing Dimensions (W/H/D) inch
38 4/7 | 27 1/6 | 22 5/6 - Waveguide 39 3/8 | 19 2/3 | 23 2/9 - Enclosure
Weight
36.38 lbs | 16.5 kg - Waveguide 114.64 lbs | 52 kg - Enclosure
Gross Weight
57.32 lbs | 26 kg - Waveguide 131.18 lbs | 59.5 kg - Enclosure
Design & Mounting
Enclosure
Internally braced birch ply and MDF
Finish
Woofer unit - Structural paint black Horn - Black matte
Mounting
Floorstanding with feet
Name
The THE BLACK SWAN Be PRO ACTIVE EXT is supplied with a front cover as standard
THE BLACK SWAN Be PRO ACTIVE EXT REFERENCE CINEMA specifications
THE BLACK SWAN Be ACTIVE EXT REFERENCE CINEMA (RC)The extreme performance of the THE BLACK SWAN Be RC with two 15" woofer units sets with its maximum sound pressure level of 140 dB (Mid / Low) new standards.Beryllium (Be)Although it is one of the most expensive materials used to make speaker…
General
Speaker Type
3” pure beryllium compression driver with proprietary ellyptical horn and 2 x custom built 15” midwoofer
Principle
Vented
Passive | Active
Active, 3Ch DSP + 3Ch Amplifier are required
Woofer
2 х Custom built 15”
Tweeter
3” pure Beryllium dome with an ultra-high-precision diaphragm-centering system and BEM-optimized 4-slot phase plug design (horn)
Recommended Amplifiers
2 x low-mid amp channels with 85 Vrms, 120 Vpk, 10.6 A; high 44 Vrms, 62 Vpk, 5.5 A; equivalent to 1 x LF 900 W @ 8 Ω, 1 x HF 240 W @ 8 Ω, with correct RMS & peak limiter settings
Recommended ASCENDO Amplifiers
DSP ULN2.2604 D
Measured Data
SPL (Half Space 2pi)
Calculated data 137 dB (Cont.) / 140 dB (Peak)
Frequency Range
Calculated Data 55 Hz - 21 kHz
Impedance
8 Ω + 8 Ω + 8 Ω
Directivity Horizontal x Vertical in deg°
90° x 45°
Input
Input Terminal
Output terminal horn - Neutrik Speakon Input terminal horn - Neutrik Speakon 2 x Input terminal woofer - Neutrik Speakon
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille)
900 | 1385 | 580 (Height without feet: 1360)
Dimensions (W/H/D) inch (Without Grille)
35 3/7 | 54 1/2 | 22 5/6 (Height without feet: 53 1/2)
Packing Dimensions (W/H/D) mm
980 | 690 | 580 - Waveguide 1000 | 500 | 590 - (x2) Woofer
Packing Dimensions (W/H/D) inch
38 4/7 | 27 1/6 | 22 5/6 - Waveguide 39 3/8 | 19 2/3 | 23 2/9 - (x2) Woofer
Weight
36.38 lbs | 16.5 kg - Waveguide 114.64 lbs | 52 kg - (x2) Woofer
Gross Weight
57.32 lbs | 26 kg - Waveguide 131.18 lbs | 59.5 kg - (x2) Woofer
Design & Mounting
Enclosure
Internally braced birch ply and MDF
Finish
Woofer unit - Structural paint black Horn - Black matte
Mounting
Floorstanding with feet
Name
The THE BLACK SWAN Be PRO ACTIVE EXT REFERENCE CINEMA is supplied with a front cover as standard
