Skip to main content
Hero DT THE_BLACK_SWAN_BE_PRO_AE_RC.jpg

THE BLACK SWAN Be

PRO ACTIVE EXT

REFERENCE CINEMA

Description

THE BLACK SWAN Be ACTIVE EXT REFERENCE CINEMA (RC)

The extreme performance of the THE BLACK SWAN Be RC with two 15" woofer units sets with its maximum sound pressure level of 140 dB (Mid / Low) new standards.

Beryllium (Be)

Although it is one of the most expensive materials used to make speaker diaphragms, in terms of stiffness-to-weight ratio, Beryllium is the highest of any known metal and can deliver dramatically superior results when properly incorporated into a speaker design.

The speed of sound through Beryllium is nearly 2.5 times faster than the speed of sound through aluminum or titanium. This means the first breakup will occur at a much higher frequency — well outside the audible range. Breakup occurs when the cone partially vibrates at certain audible frequencies and therefore isn’t entirely pistonic throughout its range. This leads to non-linearities in the amplitude response as well as stored energy in the time domain.

It is precisely these characteristics that give Beryllium speakers the ability to reproduce amazing detail and provide sound clarity with the absence of resonances.

You must be wondering, what does all this mean to me as a user?

It means, that even the finest details are all there.

It must be experienced to be believed."

Each BLACK SWAN channel is capable of incredible SPL levels, but also the more impressive dynamic contrasts from whispering dialogues to explosive effects. The volume ranges your home theatre speakers needs to be able to handle without audible distortion is huge, especially if you look for a reference level director’s cut performance - this level difference from softest to loudest sounds is called ‘dynamic range’. The THE BLACK SWAN Be  RC reproduces every possible dynamic range with ease. Even the most complex film passages with extreme dynamic requirements are reproduced at the highest clarity and lowest distortion. Imagine a life-like drum solo rendered exactly to the point by hearing and feeling the tremendous dynamic leaps of a bass drum and snare, while at the same time the humming of the cymbals fading away airily into the dark silence of the room giving way to the tiniest fine details.

This very precision lets the listener immerse entirely into the direct and intense visual action. Whether film or music – this sonic experience is not distinguishable from reality anymore.

The expertly engineered 4” pure Beryllium mid-high unit is arranged next to the 15-inch mid-woofer units. All drivers are driven by a separate (not included) DSP-controlled three-channel amplifier. Their results merge perfectly and allow for a time and phase-coherent lifelike reproduction of all acoustic events with reference level in every seat. The brain can therefore relax and stop trying to process the timing and phase errors far too common in other speaker designs.

Combined with our PRO and Infrasonic subwoofers you will experience unimaginable realism of sound paired with sheer limitless dynamics.

THE BLACK SWAN Be REFERENCE CINEMA – The most realistic high performance cinema experience.

Specification

General

Speaker Type

3” pure beryllium compression driver with proprietary ellyptical horn and 2 x custom built 15” midwoofer


Principle

Vented


Passive | Active

Active, 3Ch DSP + 3Ch Amplifier are required


Woofer

2 х Custom built 15”


Tweeter

3” pure Beryllium dome with an ultra-high-precision diaphragm-centering system and BEM-optimized 4-slot phase plug design (horn)


Recommended Amplifiers

2 x low-mid amp channels with 85 Vrms, 120 Vpk, 10.6 A; high 44 Vrms, 62 Vpk, 5.5 A; equivalent to 1 x LF 900 W @ 8 Ω, 1 x HF 240 W @ 8 Ω, with correct RMS & peak limiter settings


Recommended ASCENDO Amplifiers

DSP ULN2.2604 D


Measured Data

SPL (Half Space 2pi)

Calculated data 137 dB (Cont.) / 140 dB (Peak)


Frequency Range

Calculated Data 55 Hz - 21 kHz


Impedance

8 Ω + 8 Ω + 8 Ω


Directivity Horizontal x Vertical in deg°

90° x 45°


Input

Input Terminal

Output terminal horn - Neutrik Speakon Input terminal horn - Neutrik Speakon 2 x Input terminal woofer - Neutrik Speakon


Dimensions & Weight

Dimensions (W/H/D) mm (Without Grille)

900 | 1385 | 580 (Height without feet: 1360)


Dimensions (W/H/D) inch (Without Grille)

35 3/7 | 54 1/2 | 22 5/6 (Height without feet: 53 1/2)


Packing Dimensions (W/H/D) mm

980 | 690 | 580 - Waveguide 1000 | 500 | 590 - (x2) Woofer


Packing Dimensions (W/H/D) inch

38 4/7 | 27 1/6 | 22 5/6 - Waveguide 39 3/8 | 19 2/3 | 23 2/9 - (x2) Woofer


Weight

36.38 lbs | 16.5 kg - Waveguide 114.64 lbs | 52 kg - (x2) Woofer


Gross Weight

57.32 lbs | 26 kg - Waveguide 131.18 lbs | 59.5 kg - (x2) Woofer


Design & Mounting

Enclosure

Internally braced birch ply and MDF


Finish

Woofer unit - Structural paint black Horn - Black matte


Mounting

Floorstanding with feet


Name

The THE BLACK SWAN Be PRO ACTIVE EXT REFERENCE CINEMA is supplied with a front cover as standard


Suggested products

PP-Img THE12_SUB_PRO_PS_SH.png
PRO

THE12 SUB

PRO PASSIVE

SEALED SHALLOW

PP-Img THE16_SUB_PRO_PS_SH.png
PRO

THE16 SUB

PRO PASSIVE

SEALED SHALLOW

PP-Img THE28_SUB_SQ_PRO_PS_SH.png
PRO

THE28 SUB

SQUARED PRO PASSIVE

SEALED SHALLOW

PP-Img THE10_P_OW.png
PERFORMANCE

THE10

PASSIVE

ON WALL

PP-Img THE10_P_WE30.png
PERFORMANCE

THE10

PASSIVE

WEDGE 30

PP-Img THE12_PRO_P_OW.png
PRO

THE12

PRO PASSIVE

ON WALL

PP-Img THE_BLACK_SWAN_PRO_AE.png
PRO

THE BLACK SWAN

PRO ACTIVE EXT
PP-Img AIA2-10K2_IS.png
PRO

AIA2-10K2 IS

Show more