The THE15 Be PRO ACTIVE EXT ON WALL requires a high quality powerful 2ch DSP controlled amplifier.
The 15 Be PRO ACTIVE EXT ON WALL is an extremely impressive and extraordinary performing musical speaker system, that leaves nothing to be desired.
This 15"point source axisymmetric speaker has been designed as screen speaker for large theaters as left, center and right speaker or can be used for very large theaters as a surround speaker.
Beryllium (Be)
Although it is one of the most expensive materials used to make speaker diaphragms, in terms of stiffness-to-weight ratio, Beryllium is the highest of any known metal and can deliver dramatically superior results when properly incorporated into a speaker design.
The speed of sound through Beryllium is nearly 2.5 times faster than the speed of sound through aluminum or titanium. This means the first breakup will occur at a much higher frequency—well outside the audible range. Breakup occurs when the cone partially vibrates at certain audible frequencies and therefore isn’t entirely pistonic throughout its range. This leads to non-linearities in the amplitude response as well as stored energy in the time domain.
It is precisely these characteristics that give Beryllium speakers the ability to reproduce amazing detail and provide sound clarity with the absence of resonances.
You must be wondering, what does all this mean to me as a user?
It means, that even the finest details are all there.
It must be experienced to be believed.
Each channel of the THE15 Be PRO ACTIVE EXT is capable of incredible SPL levels, but also the more impressive dynamic contrasts from whispering dialogues to explosive effects. The volume ranges your home theatre speakers needs to be able to handle without audible distortion is huge, especially if you look for a reference level director’s cut performance - this level difference from softest to loudest sounds is called ‘dynamic range’. The THE15 Be PRO ACTIVE EXT reproduces every possible dynamic range with ease. Even the most complex film passages with extreme dynamic requirements are reproduced at the highest clarity and lowest distortion. Imagine a life-like drum solo rendered exactly to the point by hearing and feeling the tremendous dynamic leaps of a bass drum and snare, while at the same time the humming of the cymbals fading away airily into the dark silence of the room giving way to the tiniest fine details.
This very precision lets the listener immerse entirely into the direct and intense visual action. Whether film or music – this sonic experience is not distinguishable from reality anymore.
The expertly engineered Beryllium compression tweeter is centrically arranged in the back of the 15-inch mid-woofer unit, and both drivers are driven by a separate (not included) DSP-controlled two-channel amplifier. Their results merge perfectly and allow for a time and phase-coherent lifelike reproduction of all acoustic events with reference level in every seat. The brain can therefore relax and stop trying to process the timing and phase errors far too common in other speaker designs. Advanced audio-over-IP technology and a sophisticated system user interface to control every function provide an unprecedented level of control and flexibility to the calibrator.
Combined with our PRO and Infrasonic subwoofers you will experience unimaginable realism of sound paired with sheer limitless dynamics.
The15 Be PRO ACTIVE EXT ON WALL – The realistic cinema experience
Specifications
Speaker type | 15" beryllium time coherent point-source coaxial |
Principle | Vented |
Passive / Active | Active, 2Ch DSP + 2Ch Amplifier are required |
Recommended Amplifiers | low-mid 85 Vrms, 120 Vpk, 10,6 A; high 44 Vrms, 62Vpk, 5,5 A; equivalent to LF 900W@8Ω, HF 240W@ 8Ω |
Recommended ASCENDO Amplifiers | DSP ULN2-2604 D |
SPL | Measurement data |
Frequency range | Measurement data |
Woofer | 15" |
Tweeter | 1.4" (Throat) beryllium compression driver |
Directivity Horizontal x Vertical in Deg° | 85° x 85° |
Input Terrminal | Neutrik Speakon |
Enclosure | Internally braced birch ply and MDF |
Width | 18,5" / 470 mm |
Height | 34,25" / 870 mm |
Depth | 9,44" / 240 mm |
Depth With Plug | 11,02" / 280 mm |
Depth grill | 0,39" / 10 mm |
Weight | 69,45 lbs / 31,5 kg |
Finish | Structural paint black |
Custom colour options | Piano lacquer colour of choice, matte or other finishes upon request |
Shape customization | Upon request |
Mounting | 3 x wall brackets for horizontal and vertical installation, VESA 200 mounting option |
The THE15 Be PRO ACTIVE EXT is supplied with a front cover as standard
Technical modifications subject to change without further notice |
Technische Änderungen vorbehalten