THE10 PASSIVE WEDGE 30
Description
THE10 PASSIVE WEDGE 30
The design objective for this model was to offer a pre-angled version of THE10 PASSIVE ON WALL that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs. The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
THE10 PASSIVE WEDGE 30 is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
Specification
General
Speaker Type
10” time-coherent point-source coaxial
Principle
Vented
Passive | Active
Passive
Woofer
10” woofer
Tweeter
1 ⅜” voice coil diameter, compression driver
Recommended ASCENDO Amplifiers
AIA2-1404,AIA2-2704, AIA4-2404, AIA8-2704, AIA8-6004
Measured Data
SPL (Half Space 2pi)
Measured Data 120 dB (Cont.) / 130 dB (Peak) 120 dB @ 100 Hz 130 dB @ 150 Hz
Frequency Range
Measured Data (Without DSP) 100 Hz - 20 kHz / -3 dB
Power Handling
500 W
Efficiency
91 dB / 1 W/m 4 pi, 97 dB / 1 W/m 2 pi
Impedance
8 Ω
Directivity Horizontal x Vertical in deg°
85° x 85°
Input
Input Terminal
4-conductor Phoenix 12 AWG (3.3 mm²)
Dimensions & Weight
Dimensions (W/H/D) mm (Without Grille)
360 | 382 | 218 (Vertical) 360 | 218 | 382 (Horizontal)
Dimensions (W/H/D) inch (Without Grille)
14 3/16 | 15 1/16 | 8 9/16 (Vertical) 14 3/16 | 8 9/16 | 15 1/16 (Horizontal)
Packing Dimensions (W/H/D) mm
510 | 510 | 350
Packing Dimensions (W/H/D) inch
20 1/16 | 20 1/16 | 13 13/16
Weight
24.69 lbs | 11.2 kg
Gross Weight
31.96 lbs | 14.5 kg
Design & Mounting
Enclosure
Internally braced MDF
Finish
Matte black / White glossy
Mounting
Metal wall or ceiling mounting brackets allowing further angling in two axes, 8 x wall mount brackets for multiple hanging options, VESA 200 x 100 mounting points
Name
The THE10 PASSIVE WEDGE 30 is supplied with a front cover as standard
Gallery
Suggested products
