The design objective for this model was to offer a pre-angled version of The12 BE PRO ACTIVE EXT that can be installed in multiple locations where angling the speakers is mandatory. Such locations include but are not limited to front wide, Atmos and DTS top front and rear, front or rear high surrounds, side surrounds etc.
The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs.
The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.
The12 BE PRO ACTIVE EXT WEDGE is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.
Technische Daten
Zeitrichtige 30 cm Beryllium Coax-Punktschallquelle mit AIA Speaker Mangement Technologie | |
Prinzip | Reflex |
Passive / Active | Aktiv, 2Ch DSP + 2 Ch Verstärker werden benötigt |
Empfohlene Verstärker | low-mid 85 Vrms, 120 Vpk, 10,6 A; high 44 Vrms, 62Vpk, 5,5 A; equivalent to LF 900W@8Ω, HF 240W@ 8Ω |
Empfohlene ASCENDO Verstärker | DNA2250.2 |
Dauer-/Spitzenleistung | 127 dB cont. / 130 dB peak |
Frequenzbereich | 65 Hz to 21 kHz |
Treiber | 12", 300mm |
Hochtöner | 1.4" (Throat) Beryllium compression driver |
Abstrahlwinkel | 85° x 85° |
Eingang | Neutrik Speakon |
Gehäuse | Innenverstrebtes Birkensperrholz |
Breite | 19,69" / 500 mm Horizontal |
Höhe | 17,72" / 450 mm Horizontal |
Tiefe mit Stecker | 7,11-11,74" / 180,61 - 228,17 mm, Angle 15° |
Tiefe Abdeckung | 0,39" / 10 mm |
Gewicht | 48,06 lbs / 21,8 kg |
Oberfläche | robuster Strukturlack schwarz |
Farbvarianten gegen Aufpreis | Echter Klavierlack (12 Schichten): Mattlack: Farbe nach Wahl, weitere Oberflächen auf Anfrage |
Sonderausführungen | Möglich, auf Anfrage |
Montage | 4 x Wandhalterungen für Längs- und Quermontage + VESA 200 Option |